Communications Modules EDAS/VIS

Communications Modules EDAS/VIS. EDIBON Data Acquisition System/Virtual Instrumentation System, for being used with the Modules type "ED-CAM" and "ED-CFM".

The EDAS/VIS System includes a Hardware: DAIB Data Acquisition Interface Box + DAB.

Data Acquisition Board and a Software: EDAS/VIS-SOF.

Data Acquisition and Virtual Instrumentation Software: 1 DAIB.

Data Acquisition Interface Box: Steel box.

Dimensions: 310 x 220 x 145 mm. approx.

Front panel: 16 Analog inputs. Sampling velocity 1,250,000 samples per second for EDAS/VIS 1.25 Version. Sampling velocity 250,000 samples per second for EDAS/VIS 0.25 Version. 2 Analog outputs. 24 Digital inputs/outputs, configurable as inputs or outputs, with 24 state led indicators. These digital inputs/outputs are grouped in three ports of eight channels (P0, P1 and P3). Digital signal simulator. Analog signal simulator. Main ON/OFF switch.

Inside: Internal power supply of 12 and 5 V. Potentiometer.

Back panel: Power supply connector. SCSI connector (for connecting with the data acquisition board). Connecting cables. 2 DAB.

Data Acquisition Board: For EDAS/VIS 1.25 Version: PCI Data acquisition board (National Instruments) to be placed in a computer slot. Bus PCI.

Analog input: Number of channels= 16 single-ended or 8 differential. Resolution=16 bits, 1 in 65536. Sampling rate up to: 1,250,000 S/s (samples per second). Input range (V)=± 10V. Data transfers=DMA, interrupts, programmed I/0. Number of DMA channels=6.

Analog output: Number of channels=2. Resolution=16 bits, 1 in 65536.

Maximum output rate up to: 833 KS/s. Output range(V)=±10. Data transfers=DMA, interrupts, programmed I/0.

Digital Input/Output: Number of channels=24 inputs/outputs. D0 or DI

Sample Clock frequency:0 to 1 MHz.

Timing: Counter/timers=2.

Resolution: Counter/timers:32 bits.

For EDAS/VIS 1.25 Version: Sampling rate up to: 250,000 S/s (samples per second). Rest of characteristics are the same. 3 EDAS/VIS-SOF.

Data Acquisition and Virtual Instrumentation Software: Compatible with actualWindows operating systems. Amicable graphical frame. Configurable software allowing the representation of temporal evolution of the different inputs and outputs. It allows all data store in a file (16 analog inputs, 2 analog outputs, 24 digital inputs/outputs at the same time). Print screens and reports of the signals at any time. Quick capture in a period of time and posterior representation (Sampling and Hold). Two signal generators, independent for sinusoidal, triangular, saw and square. Visualization of a tension of the circuits on the computer screen. Sampling velocity 1,250,000 samples per second for EDAS/VIS 1.25 Version. Sampling velocity 250,000 samples per second for EDAS/VIS 0.25 Version. Measurement, analysis, visualization, representation and report of results. All 16 input channels could be scaled to compare signal with different voltage levels. Virtual instrumentation functions: Digital oscilloscope. Multimeter. Function generator. Spectrum analyzer. Transient recorder. Logic analyzer. Logic generator. Manuals: This system is supplied with 8 manuals: Required Services, Assembly and Installation, Interface and Software, Starting-up, Safety, Maintenance, Calibration (for computer controlled units) & Practices Manuals. This system can be used with: - All Modules type “M” (M1 to M99) of Basic Electronics (LIELBA). - All Modules type “ED-CAM, ED-CFM and EDICOM” of Communications (LICOMBA). - Transducers and Instrumentation Trainer (SAIT). * Any other electronic board.